|
  Subpart J regulatory approval provides for the Design of Aircraft and Components Design Organisation Approval (DOA). The responsibilities associated with the management of a Design Organisation are numerous and varied with a constant flow of challenges.
The primary function of the DOA holder is to assume full responsibility for all designed product (Initial Airworthiness) including the need to support Continued Airworthiness of the designed product.
As the Owner of the certification responsibility related to the product part or appliance, it is essential to ensure full compliance with all regulatory requirements, national and environmental requirements as well as all related certification specifications.
Part 21 which is essentially harmonised with FAR 21 in so much as the shared objectives was created to deliver an efficient certification processes with a reduced (in comparison to FAR 21) Direct EASA certification oversight.
How are you currently measuring the effectiveness of Design Assurance System to ensure it is delivering an effective return on your investment?
A company holding Part-21 Subpart J Design Organisation Approval (DOA), has the approval to Design and certify aircraft parts.
Q WHAT IS THE BENEFIT OF THIS TRAINING - WHAT WILL I LEARN?
a) To be able to explain the Design Organisation Assurance System
b) Achieve a high level of competency within your organisation related to regulatory obligations
c) Understanding related to the development and ownership of the continuing airworthiness obligations related to Products Parts and Appliances
d) To understand the mechanism whereby the CVE can certify full compliance with requirements
e) To be able to actively engage in the involvement of all the regulatory authority and EASA
f) To understand the methodology used to manage and control investigations and the development of Service information
Q CONTENTS
1.General Introduction
2.Revision Status Update
3.Abbreviations
4.EASA Regulatory Overview and Development of New Basic Regulation 1139/2018
5.Understanding the Principle of Implementing and Delegated Acts
6.Airworthiness Principles and Continuing Airworthiness - the link between ICAO - EASA - EU Competent Authority (CA)
7.Airworthiness Directives (ADs)
8.Commission Regulation 748/2012 and Overview of Part 21 Subparts
9.Subpart J Design Organisation Approval
10.Subpart J Design Organisation Approval Initial Issue and Assurance Process
11.EASA Delegation Processes (Part 21 Subpart J)
12.Practical Considerations related to the Design Assurance System and the roles and responsibilities, including CVEs
13.Managing Competency in a Part 21 Subpart J DOA Organisation
14.Understanding the process to Manage the Design Organisation Handbook, including the Procedures, Organisation Charts, and the Amendment Procedure
15.Developing and Managing Instructions for Continued Airworthiness ICAW
16.Design Organisation Approval (DOA) interface with Production Organisation Approval (POA)
17.EASA Part 21 Design Certification - Proportionality and Level of Involvement
18.Introduction Role and Purpose of an STC
19.Repair Approval Procedures
20.Certification and Approval Process EASA ETSO
21.Equipment Approval Procedures
22.SMS in a Part 21 Organisation
23.Subpart J Stakeholders in the Design Assurance System - Compliance Verification Engineer (CVE)
24.Subpart M - Repairs
25.Subpart P - Permit to Fly
26.Subpart Q - Identification of Products, Parts, and Appliances
27.EASA Part 21 Subpart J DOA Flight Test Considerations
Q TARGET GROUPS
Nominated personnel and other key personnel in Part 21 Design & Production Organisations, Quality Managers Design Heads, Compliance Verification Engineers, Certification Managers, Quality Control Managers, Civil Aviation Authority representatives, Military Airworthiness Design Stakeholders. Accountable Managers, Quality Auditors and Airline CAMO Staff.
Other persons interested in obtaining a detailed understanding of the Design, Certification and Production of Aircraft Parts will also find the course useful
Q PRE-REQUISITЕS
Background knowledge related to EASA regulation 748/2012 familiar with the basic concepts related to design obligations will be an advantage to benefit from this training.
Q LEARNING OBJECTIVES
A detailed understanding of Aviation Product Design and Production regulatory driven processes.
A thorough understanding of the associated terminology and procedures including changes to Type Design, Control of Supplementary Type Certificates (STC) (modifications) and repairs.
This training is intended to focus on the essential elements to provide a comprehensive understanding of the entire Design Organization / Production Organization Process.
Q ABOUT THIS COURSE
Course type: Presentation without voice over
Duration equivalent to 3-day classroom training
Category: Part 21
Price: 170 EUR
Q MULTIPLE COURSES/USERS DISCOUNTS
3 to 5 courses/delegates - 5%
6 to 10 courses/delegates - 10%
11 to 24 courses/delegates - 15%
25 to 49 courses/delegates - 20%
> 50 courses/delegates - 25%
For multiple courses/users discount please contact us at team@sassofia.com |
